Blogging

How To Use A Manual Tire Changer

How To Use A Manual Tire Changer?

Hey mates, today we’re going to tell you how to use a manual tire changer. It’s a very common tool for the auto repairing world and to every DIY worker.

This equipment requires no power connection or gaseous lines to operate it. You can operate a manual tire changer for all tires from 8 inches to light vehicle tires.

You can easily remove worn tires from rims with a portable manual tire changer. And also you can remount the new tire onto the rim with the same tool.

Let’s discuss step by step the use of a manual tire changer.

Step 1 – Assembly The Parts Of The Tire Changer

A manual tire changer already comes with an attached bead breaker to it. And so, you just need to attach other parts by bolts to the main piece and then assembly it. It’s simple than you think!

Step 2 – Set The Tire Changer In The Right Place

After you’re done the assembly of the tire changer parts, you need to set this to the floor of your garage or maybe on a wooden pallet.

But if you want to fix it to your garage floor it’s highly recommended to use a hammering drill and a masonry bit.

Because you have to drill a hole into your garage floors to put the base of the anchors. You can use bolts to secure the joint of anchors and floor.

And when you’re done it, you can easily undo the bolts and set it anywhere of the garage as you want.

Step 3 – Press On The Valve Of The Tire

Now, Press on the valve stem of the tire and allow all the inside air to release.

Step 4 – Place The Tire On The Tire Changer

Place the tire on one of the tire changer’s legs and set the tee shot parts of the tool right between the tire and rim.

Then use a pry bar to make pressure on the tire. Set the pry bar into the slot of the tire changer and push it down.

Finally, turn the tire 180 degrees and repeat this step again. As a result, the tire will loose from the rim.

Step 5 – Place The Tire Onto The Top Of The Machine

Next is time to put the wheel on the top of the tire changer but what you want to make sure is to unscrew the pin from the top first.

After setting the tire on the top, put a spider look washer on the tire which gonna secure the tire from tilting. Then screw the top of the tire changer again.

Step 6 – Take Out The Tire From The Rim

Insert a pry bar between the spaces of the tire and rim and rotate the bar clockwise to remove the tire from the rim completely.

Step 7 – Set A New Tire On The Rim

You can apply lubricant or soapy water to the edge of the tire to make your work easy. Set the new tire on the top of the rim and again insert the pry bar between the tire and rim to set the edge of the tire over the edge of the rim.

Repeat the step until the tire finally set on the rim.

Your work is done!

Final Words

Using a manual tire changer is not a hard work to do. You can visit the web for more info about it.

Hope this article will help you to know how to use a manual tire changer easily.

Thanks for stay with us.

Under Cabinet Range Hood Maintenance Guide

Under Cabinet Range Hood Maintenance Guide

The rage hood that you got installed at your home can be a vital appliance in your kitchen especially if you live in a small apartment where cooking something spicy or stinky can turn your whole apartment into smelling like a spice market. So it can be said that keeping the range hood running smoothly is a priority.

To ensure smooth operation you need to maintain your hood properly there we’ve done the work for you and bunched-up this handy guide that you can easily follow. Let us start.

Getting Down To Business

We are going to tell you how to change the fan blades and motors taking a thousandCFM four-speed motor for generalization. As it is considered as one of the best performing and longest-lasting motors. In addition, we will also tell you how to clean it and how to maintain your range hood.

I pull one of the motors out of a unit so that it’s easier to see how it this attached and how you can change and maintain with the fan blades in the house. Some hoods may have a power quick connector, these are your connections when you start up and run it in full capacity.

In the first step, we’re going to remove the housing we also need to remove the protective housing so that we can get to the inner workings. Make sure and pay close attention to the loosen and tighten directions even one of these may be along the lefthand thread so it’s not going to loosen and tighten the same way as a standard another bolt.

To handle those ones in this case so to loosen it we have to turn it the way you would normally tighten so with that of the fan both of the fan blades removed cleaning is really simple and put them in hot soapy water or a dishwasher.

If you want them cleaned up really well. The biggest problem that most users run into is after cleanings they’re directional so you need to remember which one came out of which side so you do have a left and a right. So if your arrangements changed after you cleaned there are chances that blowing air down and you may have them reverse so that’s the only tip now.

That these are long-run motors but, in the event, that you need to change a motor and you don’t want to change the entire housing and the motor together you could take the motor unit itself out by loosening some screws and nuts.

Furthermore, you pull the motor out and then you run the cord through run the new motor in and connected now if you were changing the motor on this we’ve removed the fan on the other side you would loosen this bolt and there you have it the motor will look brand new once it’s removed.

To Summarize

Your stove’s range hood can be easily overlooked when cleaning your kitchen. However, this is an area you definitely should be cleaning to keep your home safe from germs, bacteria, and fire hazards.

The hood itself can be easily cleaned if you make a regular habit of it, although it can be a hassle for some and can be really messy as well as difficult. It needs to be done to ensure the longevity of your appliance and a fresh kitchen/apartment. Good Luck.

What to look for before buying a Guinea Pig Cage

What to look for before buying a Guinea Pig Cage?

Guinea pigs, other than being their very cute selves are also very friendly, interactive and healthy eaters! It’s said that guinea pigs are one of the most social kinds of rodents in the mammals’ category.

If you’re thinking about extending your family with an addition of a pet, these tiny furballs that grow up to be three pounds later on might be just the right choice for you.

To help you choose a home for your guinea pig, here’s a go-to guide on which to choose and what to do next.

Sounds interesting? Scroll down to learn more!

Everything About Guinea Pig Cage

It must be mentioned that other than guinea pigs being social, easy to tame, they also need space—a lot of it.

There are many options for you to choose from, but it’s really important that you realize that since you’re taking up a new responsibility, you need to learn to provide them with the best you can.

It’s recommended that you provide your piggy with about seven to ten square feet of space. Here’s a list of guinea pig cage you can select for your guinea pig:

  • Aquariums

This is the first choice generally because mainly it comes cheap and is easier to clean.

Unfortunately, using the cheap way will only cause your pet to suffer in the long run. Housing your pet in a confined area, will prevent healthy air circulation and also cause them to become skittish.

  • Pet Store Cages

Even though they are labeled with certain sizes, pet store cages don’t really fulfill the minimum requirement of seven square feet.

They can be bought with the mentality of ‘starter homes’, but since guinea pigs are long-term partners, it’s better to go for a long-term housing system.

  • Cubes and Chloroplast

Heard of the gold standard housing system? This is it. These cages are made of cube grids and chloroplasts. They are easy to clean and will provide your piggy with lots of space and can be linked with both feeling and the traditional softer bedding.

  • Homemade Cages

These really can be anything, if you’re big on the imagination and creative department—as well as are smart enough to make it safe. For instance, a child’s swimming pool can be used as a home for your piggy after you make sure that it cannot jump out.

Decorate their Home

  • Bedding. For bedding use hay or the new recycling paper beddings.
  • Nest box. Provide a nest box, which is literally a necessity. Your piggy needs its hiding place.
  • Toys. Crumpled paper, hard cat toys or cardboard boxes, whatever interests them. Provide exercise pens, can be made out of wire.
  • Food and Water. Use ceramic bowls to provide food and bottles with a steel spout and ball for water.

Get your piggy!

Now that you’ve learned about the what-to-dos, it’s important that you also realize that this is a long term relationship. Just make sure, that you two are always on the same page.

Now with a happy and committed mindset, bring your cavy home!

What to Look for Before Buying A Chinchilla Cage

What to Look for Before Buying A Chinchilla Cage?

Chinchillas are adorable rodents that can light up your life with their energetic and playful nature. You in return need to take good care of them so they continue to stay healthy and happy. One of the first steps in getting a Chinchilla is to look for a cage. Before you begin the search, read some Chinchilla Cage reviews first.

A cage for a chinchilla, for starters, should be well adjusted. There should be enough room for them to move about, as Chinchillas tend to be very energetic pets. Some of them can jump even up to 6 feet. So it’s your job to make their stay as comfortable as possible.

In this guide, we will consider the things to consider before buying a Chinchilla cage.

  • Material

The material is important when it comes to your Chinchilla’s overall safety. Chinchillas tend to chew, meaning they will chew on the cage too. Avoid any material that can be chewed and ingested, like plastic.

Instead, look for materials such as galvanized steel. They are pricier, but also a great investment as they are sturdier so they’ll last longer.

While looking for cages, make sure that the trays are made of metal as well. Usually, they come with plastic trays, so try to find an online seller who can customize your order.

 Tip: Give your chinchilla toys to reduce the chewing on cages.

  • Space

Like already mentioned, Chinchillas are playful and energetic, so they’ll run around the cage. Give them enough space to do that.

If your pocket can afford it, go for the largest size. In case of space is an issue, look for multi-storied cages so they still have the option of running and jumping.

Tip: A cage with 3X2X2 feet measurements is a good option.

  • Style

Chinchilla cages generally come in two styles: solid and wire mesh flooring. it’s better that you avoid the wire mesh as they hurt the feet. The reason they are available in the market is that they are easier to clean.

But damaging your pet’s feet just because of your comfort is selfish. Keeping the chinchilla in such condition can even result in sore hocks or Pododermatitis, which is inflammation on the paws. So choose the one with a solid floor.

Tip: If you can’t avoid getting a wire mesh floor, place a wooden block inside so that the chinchilla can rest.

  • Breathability

Chinchillas are sensitive when it comes to heat and humidity, so you need to place your cage in a place with suitable conditions. Don’t buy an enclosed cage as they tend to get overheated. Plastic bins should be avoided for the same reason.

An ideal temperature range is 15 to 20 degrees. Don’t place the cage near fans or furnace vents.

  • Ease of Cleaning

A large cage is better for you when it comes to cleaning, as the chinchilla won’t roll in the muck as often. A cage that comes with a pan or deep tray is better for easy cleanup.

Buy A Chinchilla Cage to Keep It Happy!

Look for suitable options as mentioned in this guide, and you should find a perfect cage for your chinchilla. They are happy and energetic pets, and doing proper research before committing to a cage can help ensure that.

Plasma Cutting Basics

Plasma Cutting Basics

Are you looking for instruments or tools for cutting higher volumes like metals? In that case, the plasma cutter will be a better option that can substitute your mechanical saw. Metal welding and cutting have become an important task both in industrial sites and at home. Trust me, your investment is worth it.

With a lot of benefits including less cost, great efficiency and speed, the plasma cutting system have become famous across the world. The portability also made it easier to travel with a plasma cutter and use it according to your needs.

In our article, we will be discussing the simple basics of plasma cutting. Read the whole article with patience to make things a bit more clear. So, without any delay, let’s get into the main topic.

What is Plasma Cutting?

Basically, when you use a plasma cutter for cutting metals is called the plasma cutting system. This process uses a high velocity ionized gas that conducts electricity to cut pieces and melt the metal.

Thus plasma heats the metals pieces and melts with increased heat supplies. Molten metals will eventually be blown away with the help of the high-velocity stream.

What is Plasma Cutting

Plasma cutting technology is able to cut any kind of metals including non-ferrous metals including aluminum, cast-iron, stainless steel, etc. These materials are used widely for different purposes.

The plasma cutting technology is also acclaimed for its high speed and efficiency. If you want to cut thinner pieces then the plasma cutting system is highly recommended.

What Is the Usage Of A Plasma Cutter?

Firstly, the plasma cutting system is ideal for non- ferrous and conductive metals like stainless steel, aluminum, and cast iron that come in thinner plates.

This system will allow you with cutting lengthy metal sheets that are quite tough with other metal welding systems. With a plasma cutter, you will also be able to make non-linear cuts with the highest speed that will save you valuable time.

Things You Should Consider Before Buying A Plasma Cutting Machine

When you are determined to buy something, it is mandatory to know some factors so that in the long run you may not disappoint yourself.

So, here goes some of the factors you must not overlook before end up buying a plasma cutting machine.

  1. Cutting Speed

If you have issues like doing a job faster in a working environment, then this tool can be your best assistant. Plasma cutting machines can do the job faster than other machines for its high velocity and speed.

  1. Look If It Is Portable or Not

With advanced technology, machines and tools are getting smaller in size and mightier in performance. If you want to carry your cutting tool with you then a plasma cutter will be the best choice. Given less weight of a plasma cutter, you will be able to carry this thing inside your backpack.

  1. Ruggedness

You should look for tools or machines that offer high durability and protection features. Some good companies offer a protective cage around the air filter that ensures the removal of oil from the compressed air. So, choose machines that have protection filters.

  1. Determine the Thickness of Metal

It is very important to look for machines that have a unique cutting capacity. Like if you want to cut thinner plates, then go for a plasma cutter. But in case you want to cut thicker metal sheets, do not choose a plasma cutter as you will find many difficulties.

  1. Look for Safety Measures

Look for particular brands that offer great safety features. You should also check if the machine has a pre-flow safety or not because this feature will give advanced warning before using.

Plasma Cutting Process

Nowadays, the plasma cutter is a versatile tool and a must needed item for a welder, described in a blog post by fiixitman blog. There are some steps that you should follow if you want to get the most of a plasma cutting tool. So, give a quick look at the following factors you should consider;

  • Set the machine with utmost caution.
  • Read the instruction manuals carefully and implement the safety gear.
  • Never try to touch the nozzle.
  • Set the electricity pass that is the current to maximum level as you start the operation.
  • Try to maintain work distance for extra safety issues.
  • Try to work in a way that will give you the best result. It mainly depends on your comfort zone which is what way you prefer the most.

Drawbacks of a Plasma Cutter

With advantages, comes disadvantages also. There are some limitations to a plasma cutter. They are as follows:

  • A plasma cutter cannot cut thicker metal plates effectively.
  • It uses up a lot of electricity for an efficient service.
  • A little bit expensive for having advanced technology.

Conclusion

We have done our research and tried to provide you with the basics of plasma cutting. Hopefully, it will be easier for you to deal with a plasma cutter from now on. Thanks for staying with us and for the patience reading. Cheers!

How to Clean a Tankless Water Heater

How to Clean a Tankless Water Heater?

A tankless water heater is a very reliable heating system that is a must need for every homeowner. It is energy efficient and not only that; you will be able to use it for more than two decades if you can do the maintenance

During the time a customer goes to the shop to buy a heater, the manufacturer always tells them to clean it once every year. This process will prevent materials like calcium or other things to form in the heater with time. Even hard water imposes a negative impact on this heating system.

So, from the following article, you will get the proper ways to clean a tankless water heater in a very easy way. Read in to find out more.

Equipment Which Is Necessary

  • Tester (electrical)
  • Screwdriver
  • Wrench
  • Sump pump (small size)
  • Bucket (4-5 gallon)
  • 2 Garden hose with connectors (6 foot)
  • White vinegar (4-5 gallon)

How-to-Clean-a-Tankless-Water-Heater

Steps

Below, you will find out the step by step guideline that you can follow in order to clean the tankless water heater.

  • Step 1

Turn off the tankless heater before you start the cleaning process. If you are using the electric one, make sure the electrical circuits are all shut down completely. For the gas unit, you can simply turn off the gas supply line by rotating the valve in an anti-clockwise direction.

  • Step 2

Now, you have to remove the cover of the heater carefully. Use the screwdriver to help you with this task. Go to the wiring unit, but don’t touch it as it is very dangerous for you. Take the electrical tester and put it in the wiring area.

If you see that the light from the tester just turned on, it means that there is still some electricity running. Re-check all the connections, including the circuit breakers, and keep using the tester until the lights are not showing up from it.

  • Step 3

There is a supply valve that creates a pathway for the cold water to move towards the heater. You must turn it off and do the same thing for the hot water valve. This valve plays the role of distributing hot water to your appliances.

  • Step 4

Connect the hose with the sump pump. Use the other end to connect it with the cold water isolation valve. Then, pick another hose and connect it with the hot water isolation valve. Check whether the couplers are properly getting tight or not. You can do this with the help of the wrench.

  • Step 5

How to Clean A Tankless Water Heater

Put the pump and the second hose (open end) into the bucket. Gently fill the bucket with the white vinegar. Don’t be in a hurry, take some time and patience.

  • Step 6

Go to the hot and cold isolation valve on the water and open both of them. When everything is set, turn on the pump that is placed in the bucket. This process will help the vinegar to circulate throughout the heater.

  • Step 7

Do it for around 45 minutes and then turn it off. Give some time to let all the vinegar to flush from the heater straight to the bucket. After it is done, close the isolation valve of the cold water.

  • Step 8

Remove all of the vinegar from the bucket and place the hose (open end) again inside the bucket. Open the cold water supply valve and give around 4-5 minutes to let the water run into the bucket. Then turn it off and remove the hose from the inlet valves.

  • Step 9

Turn off the isolation valve of the hot water. You will find an inlet filter screen in the heater. For further clarification, you can go through the instruction manual. Clean the screen to remove any kind of residue sand, and when it is done, put it back onto its original position.

  • Step 10

First turn on the hot water supply valve then, do it for the cold water one. For safety purposes, open some of the faucets inside your home to release any kind of hot air that could remain stuck.

Check it constantly, and when you are feeling no hot air getting released from the faucet, turn it off.

  • Step 11

Go through all of the connections to detect any kind of flaws like leaks, loose connections, etc. Turn on the gas supply valve along with the circuit breaker and enjoy the fresh hot water. Congrats! You are finished with the cleaning work.

Conclusion

Getting the right tankless water heater is a very important step for every homeowner. After all, you will always prefer your investment to be beneficial for you.

Go through the steps a couple of times so that you can remember it when you are in need of it.

Best of luck with the cleaning!

Dangers of Using a Nonstick Cookware – Are There Any?

By the term “nonstick cookware”, we mean the pans and skillets that have a nonstick coating that allows cooking food without making it sticky to the pan. It is a famous type of cookware nowadays because of its quality and for easy cleaning and maintenance. Even it will allow you to cook food without the use of butter or oil.

In spite of that, the question comes if they are really safe to use or not. In the USA, very recently, almost seventy percent of the cookware sold was nonstick.

A lot of consumers show health-related concerns that arise from the emissions of the harmful chemicals of nonstick cookware. There were a good number of studies and reports from various sources and industries that lead to conflicting issues.

This article will mainly talk about the dangers of using nonstick cookware.

Dangers of Nonstick Cookware

The main danger of nonstick cookware lies in the ingredients of the pan used to make it nonstick. There are a good number of harmful toxins and chemical bonds that can cause serious health complications.

Nonstick-Cookware-set

Even the chemicals that are being used for making the pan nonstick can be considered as carcinogenic to health. In order to have a glimpse of its seriousness, just think about that 95 % of the Americans who were identified to be carrying small levels of these harmful substances when their blood was tested.

When it comes to the environment, the main concern remains about the manufacturing plants that make cookware coated with Teflon. A professor of medicine at the University of Pennsylvania continued studying the water supply close to a Teflon plant in Ohio.

He aimed to find out the effects on people who got exposed to those water. His study found out that those who were exposed to that water supply were affected sixty to eighty times more than that of the general people.

Is Nonstick Teflon Coated Cookware Toxic?

Various researches are being conducted to know about the danger related to the use of nonstick cookware. The EPA conducts continuous monitoring on the use of this cookware because of the chemicals that get released from it while cooking. However, EPA hasn’t given any specific guidelines relating to the threats for health. The 2 chemical substances, PTFE and PFOA are considered as responsible for several health threats. Nevertheless, it remains a bit vague about whether to blame the nonstick cookwares as a whole for this or not.

Dangers of PTFE & PFOA

Here are all the dangers that you will have to keep in mind.

Dangers-of-Nonstick-Cookware

  • Polytetrafluoroethylene(PTFE)

Teflon is used as a coat in many of the nonstick cookware. Its full abbreviation is polytetrafluoroethylene (PTFE). When Teflon is exposed to very high heat, it starts emitting poisonous gases. This gas can be really very poisonous for your lungs to inhale.

They can also lead to organ failure, infertility, reproductive damages or, even cancer. Researchers say that when cookwares are heated to 600 degrees or, higher than that, various types of toxic gases get released in the environment.

There is another concern about these coatings to get flaked off. As a result, there will be a chance of ingesting this harmful substance. Mostly, this risk lies when poor or, cheap quality cookwares are used.

In addition, when metal instruments like spoons, flippers, spatulas, etc. are used on the cookware for cooking purpose, it increases the risk of flaking to a great extent. This flaked pieces can get mixed with your food while cooking later on, which is really unhealthy.

  • Perfluorooctanoic Acid (PFOA)

One of the key ingredients in the case of nonstick Teflon cookware is PFOA. This substance was under inquiries and examinations by EPA because of the chemical found in the human blood and in water supplies.

Although EPA is not sure enough about the exact threats that are being exerted by this chemical, they are assuming that it might have a close relation to the formation of cancer in body cells.

On the other hand, the British researchers conducted a study for disease control where they tested the blood of around 4000 adults. As per the research, those whose tested blood samples were positive for PFOA were found to be twice as likely to form the disease called thyroid in them.

The counterparts also had the same risk of developing thyroid disease, but that was lower than these people who had a high risk of developing the disease. From this, the researchers called people to get exposed to as little PFOA as possible.

However, keep in mind that PFOA can stay in the body for a couple of years. As per Environment Working Group, if someone stops the exposure to PFOA completely, it’ll take almost about four years for his body to totally eliminate the accumulated PFOA that got entered into his nerves and tissues.

Toxic Fumes from Nonstick Cookware

At very high heat, the nonstick cookware coat can break down into several chemical agents known as PFIB. It might even form a chemical analog of WWII nerve gas named phosgene. That means the one whom you are considering to be your best friend in the kitchen may be the worst enemy for you and your family’s health.

Therefore, don’t forget that it takes only about 5 minutes for nonstick cookware to release 6 different types of harmful gases.

Conclusion

Cooking is a passion for some people and a kind of labor done out of love. Nevertheless, nonstick cookwares are making that labor turn into a health risk. You can continue using your nonstick cookware or, can eliminate these dangerous products from your life and start living healthy.

Ideal Kitchen for Happy Cooking – Newbie’s Guide

A kitchen is a place that reminds us of love, compassion and celebrating the simple moments of our lives. An ideal kitchen is the one that embraces your personality. If you are an artsy person, your kitchen will be full of art pieces and favoring the aesthetics.

If you like a polished room, your kitchen will have neutral colors and a simple, organized look. Some people like to keep small plants in their kitchen also.

Well, the design and accessories are not the only part of an ideal kitchen. If your kitchen is not fully equipped to meet your purpose, there is no reason to call it ideal. The ideal kitchen will have everything that is compatible with your habits and make cooking for you easy and fun!

What is Happy Cooking?

When we imagine happy cooking, the scenes from rom-com movies light up in our brain where the girl dances around the kitchen making pancakes. However, that certainly is an expression of happiness but not always happy cooking is exactly that. You don’t have to dance around while cooking to express happiness in it.

Ideal-Kitchen--Happy-Cooking

Happy cooking is basically convenient for cooking. If you notice that every day making breakfast is inconvenient because your fridge is in the leaving room and your stove is in the kitchen, that is something you would like to change.

Many of us notice that we are facing difficulties and our work could be faster, but cannot pinpoint what actually makes it hard?

If you are imagining your kitchen to be a happy place, prioritize convenience. The rush hour during breakfast or the dinner-making at night; both can be enjoyable if your kitchen is built around your needs and habit.

For a newbie, to know what to consider and where to begin can be understandably challenging. Either you are remodeling your kitchen or you are building one fresh, certain guidelines will most definitely help you!

The Guidelines

Here are some guidelines that you can follow.

  • Make a List

Make a list of everything that you plan and you need. Make 3 different lists. One list will be of your furniture. Another will be of electronics and cooking appliances, and the third one for how you want colors and design to be like.

Listing of all things will make it easier for you to shop and arrange them in the kitchen. Keep in mind the space you have, so it does not look cluttered.

  • Consider Traffic

Before planning on how you will arrange and design the kitchen, think about how much traffic your kitchen will face. Imagine where people will walkthrough, and if you are a parent, consider how your kids will use the kitchen.

Many kitchens have doors to the basement or pantry. If your kitchen has too many doors, close one or two of them. That will increase space. Arrange the fridge, sink, the cabinets and stoves in such a way that it is easy to be used by all living in the house.

  • The Work Triangle

The work triangle used to be one of the most important things to be considered while planning kitchen decor. The triangle includes the refrigerator, the sink, and the cooking range. The trick is, these three things will be arranged in a triangle having the shortest distance between them. The appliances should be face front in the triangle.

Ideal-Kitchen

Accordingly, it should not be longer than 8 meters or 26ft. A single side of the triangle must be between 4ft and 9ft. The cook must have enough space to work around without hindrance.

Many modern kitchen electronics are not included in the triangle. The microwave, coffee maker, etc. can be out here and based on needs to be included in the kitchen.

  • Deciding on Equipment

Both ovens and cooktops can be used for cooking everything you will need. First, decide what kind of power you will use for cooking. Will you cook with electricity or gas? Everything must be in sync before you start working.

Likewise, the dishwasher must always be next to the sink. The windows must be close to the stove or oven. The vent wall must be located on a wall facing outside otherwise all the fumes will go to the next room.

In addition, make sure your refrigerator has enough space and two separate sections for freeze and refrigeration. Storing day to day mild and heavy food together will get easily rotten; hence, food like fish and meat can be separated in this way.

  • Cabinets and Shelves

Kitchen cabinets are something you can go very flexible with. Many companies offer a versatile range of cabinets in different shapes and colors. Your cabinet must also have enough space to store everything you might need.

If you don’t have a pantry or storage space, you might want to have cabinets with wider space and opaque doors. Cabinets should not be placed over the cooktop. That will ruin the quality of the cabinet and make it sticky with grease.

  • Working Space

The countertop of your kitchen must have enough space to work on. You can design your countertops too! There are many options; cement, marble, and epoxy are popular now. Depending on your budget, choose a countertop that fits your kitchen best. The height of your countertop should be compatible with your size.

However, as this thing is customized, make it as comfortable for you as possible.

  • The Sink and Island

There are thousands of options for the sink. You should decide based on who will be using the sink. If you have children, build a sink with space around it, so the water does not splash everywhere. Make sure the quality is excellent and anti-scratch. A smooth sink is also easier to clean.

The island depends on the size of your kitchen. If you have a big kitchen with enough space, you can add a dining table or a fancy cook station.

  • Let It Express Your Personality

Allow your kitchen to be as you are. If you are a messy person, let it be messy! If you like bright colors, paint the brightest yellow you know. Let your kitchen be your happy place.

Conclusion

You can bond over food with anyone. It breaks barriers between people and helps them keep in contact. Let yourself realize that your kitchen is important in your life. The moments you spend in your kitchen are simple yet very precious. Decorate it the way you like and enjoy it!

The Plus and Minus Points About Hard Anodized Cookware

Hard anodized cookware goes through a natural process called anodization where the aluminum is lined with a corrosion-resistant oxide agent. For manufacturing hard anodized cookware, the process is enhanced and accelerated.

Anodization is an electrochemical process that gives aluminum a durable, corrosion-resistant and aesthetically pleasing finish. Anodization ensures that the surface of this material gets a negative electrical charge which leads to an increase in the thickness in the oxide layer.

The oxide layer makes the aluminum surface harder, more durable and corrosion-resistant. It also makes the cookware scratch proof and non-stick.

One of the concerns with using hard anodized cookware is the aluminum base. Aluminum is harmful to the human body, and its consumption can lead to cancer. The hard anodized surface ensures that the material will not migrate to the food.

The use of aluminum yet discourages consumers from buying hard anodized cookware.

User Guidelines

Hard-Anodized-Cook

Hard anodized cookware is fairly easy to use and is very convenient for cooking. As they are dipped in an acid bath for purposes relating to electrical charges, the cookware needs proper care in cases of cleaning and drying. Even though they are stick-resistant and boast a very long lifespan, they require proper care.

Before Use

Having purchased a new hard anodized cookware, the first task is to wash it thoroughly in hot, soapy water. Then rinse and allow it to dry.

Taking Care Of The Stainless Surface

Hard anodized cookware can withstand the use of metal utensils such as spoons, whisk or even metal spatulas, but the use of sharp knives or hand mixer on the hard anodized surface will form scratches on the surface. Hence, it is better to avoid the use of those.

Temperature Adjustment

Aluminum is an excellent conductor of heat. As a result, the hard-anodized pots and pans heat up fast. For cooking in these kinds of pots, a lower temperature is necessary. Use a lower setting than you use for other types of cookware.

Avoid Throwing In Frozen Food Straight Out Of The Fridge

Even though hard anodized cookware is non-stick, cooking refrigerated food will lead to the food sticking to the pan. Allow the frozen food to melt and reach room temperature before placing them on a pan as this will ensure the food is cooked evenly without sticking at the bottom.

Refrain From Keeping Food Stored In The Cookware

The lids of hard anodized cookware don’t come with air-tight seals. Storing food in one will lead to it getting spoiled.

Keep It Clean

Hand washes your pans and pots after each use with dishwashing soaps. Make sure old food residue is completely scrubbed off to ensure the spoilage of food is avoided.

Hard--Cookware

Hard anodized cookware is a convenient, user-friendly appliance but it comes with its fair share of pros and cons. Let’s take a look at those:

The Pros

  • The Hardness Of The Surface

The most impressive feature of hard anodized cookware is its durability. The anodized aluminum does not scratch or peel and is twice as hard as stainless steel. It does not chip or break easily and are long-lasting.

  • Less Toxic

The anodization process is natural and the smooth surface is from the electrochemical processes which create the layer of non-stick oxide. The pans are environment-friendly and recyclable.

  • Non-stick

The oxide gives the pan surface a smooth and non-stick finish which makes it very convenient for cooking. It saves time and cooking oil and is easy to clean.

  • Lightweight

As the pans are made out of aluminum, a lighter metal, the overall appliance is lightweight, making it easier to use and store.

  • Aesthetics

Having exterior thick shiny coating gives the anodized cookware a gorgeous look. If maintained properly, this look lasts very long. The color stability from oxide and metallic finish does not wear off easily.

  • Efficient Cooking

Aluminum is a good conductor of heat and electricity ensuring fast, efficient and proper cooking of the food.

The Cons

  • Expensive

The price range of anodized cookware is a concern to many. They are generally more expensive than anodized cookware.

  • Not Safe For Induction

Induction stoves require a magnetic referral in the bottom of the pan, which aluminum pans do not have made them unsafe for induction.

  • Cleaning Can Be A Hassle

Unlike traditional cookware, anodized cookware requires the use of soft and mild detergent and careful handwashing for purposes of cleaning.

Conclusion

Aesthetically pleasing, convenient to use and long-lasting, hard anodized cookware is rapidly gaining popularity. Although they need sophisticated handling, they are a very useful utensil and are a cook’s favorite.

It is recommended for anyone looking for cookware that cooks efficiently and can last longer. It is a great investment.

Is Stainless Steel Cookware Worth?

Stainless steel is a mixture of iron, chromium, and nickel. Stainless steel is known for its durability and attractive appearance. The word stainless is given a name for its rust-resistant properties. It does not stain or develop rust. Moreover, it also resists corrosion and oxidation. The presence of water or oxygen cannot damage it as well.

The stainless steel cookware is known for its aesthetics. Their pots and pans look gorgeous and are ideal for searing, sautéing, browning, etc. These types of utensils are trendy and seen in almost every kitchen.

Accordingly, stainless steel is not a good conductor of heat. Experts suggest buying cookware that has copper cores or copper body as copper heats up very fast and cools down quickly. However, cooking in a utensil made entirely of stainless steel will give you hot spots.

Recognizing the Quality of Stainless Steel

Stainless steel cookware is recognized to be safe for cooking. Any good quality stainless steel is a better choice than other substitutes available in the market. The metal steel itself is much stronger than plain iron, which makes the steel stainless is chromium.

Stainless-Steel-Cook

In that sense, to measure the quality of stainless steel, you should check the amount of chromium present in it. The higher the amount of chromium in the steel has better the resistance to corrosion.

Consequently, there are different kinds of stainless steel used for making cookware. The certified types are AISI 200 series, 300 series, and 400 series. The 300 series has 304 and 316 types. The 400 is magnetic. For the 200 series, the creators replaced the nickel with manganese because it’s cheaper.

What to Look before Buying?

While buying or even considering purchasing a stainless steel utensil, you should measure the market and consider some things before making the purchase. Here are some points to keep in mind before you make your decision:

  • The Grade of the Steel

You don’t have to be a scientist to measure the grade of stainless steel. Make sure the cookware is made with 18/8 or 18/10 as these are the standards for good quality cookware. These numbers will be stamped at the bottom of the cookware or stated on the box.

  • Weight of the Utensil

A good quality stainless steel cookware will have a significant weight. A heavier pot means that it contains more materials. In addition, if it’s sturdy, there are fewer chances for dents and dings. If you are shopping online, check the reviews.

  • The Material Used in Core

Stainless steel is a very poor conductor of heat. You would want a set that has copper or aluminum as the core. This combination will give you the high heat conductivity of the two metals, and also the longevity of stainless steel.

Benefits of Stainless Steel Cookware

To make a decision about whether stainless steel cookware is worth it or not, you must leverage the benefits and disadvantages of the cookware. Stainless steel does offer lots of advantages.

  • Durability

You can scratch it, throw it, scrub it roughly; it will still work. The steel is also harder than copper or aluminum and has a higher melting point than both metals. This cookware is the most long-lasting of all the cookware in the market. It lasts longer than them and withstands more.

  • Maintenance is Easy

These types of cookware do not need special care. They don’t lose their shining very easily; even if they do, just take a cup of water and vinegar to regain the shine.

  • Does not React

Unlike other metals used for manufacturing cookware as aluminum and copper, stainless steel does not react with any of the acidic foods out there. It is very inert. It does not react with any kind of food.

  • Great for Searing and Sauteing

Steel can withstand higher heat and temperature better than the other metals. So cooking processes like searing and sauteing can be done in stainless steel with no issue.

  • Versatile

Stainless steel is not just suitable for searing and sautéing, it’s also great for frying, boiling, braising, stewing, poaching, and even steaming. You can do just about everything in it.

  • Aesthetics

Stainless steel looks good. The cookware made of it looks very classy and gorgeous. The shiny, polished luster is hard to beat.

  • The Core Can be a Different Metal

As the heat conductivity of steel is low, it can be paired with copper or aluminum as its core. This is done frequently so the cookware can provide the best of the two kinds of metals.

  • Price Benefit

The durability of stainless steel cookware offers at a cheap price and that is one of the best deals of kitchen appliances. They are generally very affordable. The value lies in its durability. If you buy one set, you can use it for years.

Disadvantages of Stainless Steel Cookware

With amazing benefits, there also come some disadvantages. To make a good solid decision, you should consider both sides of the coin.

Stainless-Steel

  • Poor Heat Conductor

Stainless steel cookware must have copper and aluminum to be good conductors. Without the copper or aluminum core, cooking with steel cookware is extremely hard as the pan does not heat up. It wastes both time and energy.

  • Discoloration

Stainless steel can withstand higher heat than copper or aluminum, but it comes with a cost. When exposed to high heat, the color of coating changes and the steel does not look very shiny anymore. High heat makes it ugly.

  • Salt Damage

Saltwater can cause pitting on the pans. Pitting is extremely localized corrosion caused by salt that can create a hole in the pot. So you will have to throw the pot away if you use salt water.

  • It’s not Non-Stick

This is one of the most classic issues while cooking with stainless steel, food tends to get stuck to the pan. Stainless steel cookware is really bad for cooking delicate foods. It requires a lot of oil or fat for creating a non-stick surface. You can never use it to cook eggs, fish, and lean meat.

Conclusion

Stainless steel cookware offers more benefits than disadvantages without depending on who is making the purchase. At the same time, if it’s a person whose diet includes more eggs, they should not buy it.

However, for others, it’s a great asset to the kitchen.